广州伟伯科技有限公司
您的位置:首页 > 产品中心 > 3D Printing Hydroxyapatite ink
产品搜索:

3D Printing Hydroxyapatite ink

产品编号:4084163
包装规格:5 ML
产品类别:进口试剂
品牌:Sigma-Aldrich
优惠价:立即咨询
产品价格
产品编号包装单位单价(元)国内现货国外库存询价单
40841635 ML4560
产品别名

3D Printing Hydroxyapatite ink

3D printing Hydroxylapatite ink

Durapatite

Hyperelastic bone

Hydroxylapatite

Calcium phosphate hydroxide

Hydroxyapatite

基本信息
NACRES
NA.23
Application【应用】
This research grade (not for human use) Hydroxyapatite or Hyper elastic Bone 3D-printing ink can be used for printing using a direct extrusion (pneumatic or mechanical) 3D-printer into multi-layered, three-dimensional objects at room temperature. This ink should only be used in a well-ventilated environment. The extruded material rapidly solidifies and allows creation of complex, user-designed forms. Despite being mostly hydroxyapatite, the printed solid material is flexible (may even have limited elastic properties). The solids loading of the as-dried material is 85 vol.% hydroxyapatite, 15 vol.% PLGA. This Hyper elastic Bone ink can be utilized to create three-dimensional structures on their own, or co-3D-printed with other 3D-printing inks to create multi-material structures. The ink may also be mixed with other 3D-printing inks to compound them prior to utilization. Due to the mechanical flexibility of the material after drying, complex 2D and 3D forms can be created. This ink may also be utilized in non-3D-printing applications such as coating (dip-coating or direct painting), thread fabrication, or casting into molds.
Our Hyper elastic Bone 3D-printing ink is comprised of micron sized hydroxyapatite suspended in a mixture of organic solvents containing a dissolved, high molecular weight elastomeric, biocompatible polyester (polylactic-co-glycolic acid;PLGA). Prior to further use, to remove residual solvents after 3D-printing (or other application such as coating, direct painting etc) the composite material should be washed in 70% ethanol and then by water. The 3D-printed hydroxyapatite can be used as a flexible, bioactive, biocompatible ceramic composite or it can also be sintered (1500 ℃ recommended) in a non-oxidative atmosphere to yield Hyper elastic Bone parts. As sintered, Hyper elastic Bone is highly chemically and thermally stable, and can be used for a wide variety of high temperature applications. It also has numerous hard biological tissue (teeth and bone) applications, and can serve in it as as-printed, washed form as flexible ceramic composite cell scaffold, or in its sintered form, as a rigid ceramic scaffold/implant. In its 3D-printed, flexible form, Hyper elastic Bone has been shown to be highly osteoconductive, and osteogenic, capable of differentiation adult human stem cells into osteoblast-like cells.
Caution【注意】
Prior to use mix until the ink becomes homogeneous
产品性质
storage temp.【储存温度】
2-8℃
安全信息
Pictograms【象形图】
GHS07,GHS08
Signal word【警示用语:】
Danger
Hazard Statements
H315 - H319 - H336 - H351 - H360FD - H412
Precautionary Statements
P202 - P261 - P273 - P302 + P352 - P305 + P351 + P338 - P308 + P313
Hazard Classifications【危险分类】
Aquatic Chronic 3 - Carc. 2 - Eye Irrit. 2 - Repr. 1B - Skin Irrit. 2 - STOT SE 3
Target Organs【靶器官】
Central nervous system
Storage Class Code【储存分类代码】
6.1C - Combustible, acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects
WGK
WGK 3
Flash Point(F)【闪点(F)】
152.6 °F
Flash Point(C)【闪点(C)】
67 ℃
广州伟伯科技有限公司 版权所有 CopyRight ©2006-2024, All Rights Reserved
工信部备案号:粤ICP备08114744号   Page Run Time: 0.0103